Sheridan blue streak repair8/24/2023 ![]() ![]() I was surprised how exact the fit of the nut end of the tool must be, to break the NUT loose from the valve. 35".Ħ) Heated up the nut end and hardened it. I ground the 1/2" rod into a square and filed it down to. But if you do some of things I did, it will go easier.ġ) I used 1/2" Steel rod about 5" long in hindsight, make it 6" or a little more.Ģ) I ended up drilling out the square end to 9/32" and the threaded end 7/32".ģ) Drilled a 3/16" hole through the rod about 1/2" from each end of the tool - for screwdriver to go through to unscrew nut.ĥ) Another member gave me the dimensions (Thanks Limbshaker) of the square nut end to be. My first recommendation is don't do it as it's really a pain in the butt. Since I went the cheap route and made my Benjamin 342 valve tool, I'd thought I post it for anyone who might want to do the same. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |